SEAFLO Pumps, Blowers, Bilges and more

Seaflo Macerator Pump 01-Series

Sale!

Seaflo Macerator Pump 01-Series

$75.99

The SEAFLO 01-Series DC macerator pump unit is the ideal solution for the emptying of marine holding tanks, fish boxes and livewell receptacles.

SKU: N/A Category:

Description

Features & Benefits

  • Dual Blade and Housing
  • Seamless Shell Design
  • Thermally Protected Motor
  • High Quality Efficient Motor
  • Run Dry Capability

Typical Applications

  • RV & Campers
  • Boats & Mobile Kitchenware
  • Industrial
  • Marine
SEAFLO MACERATOR PUMPLiquid Temperature
140°F (60°C) Max.
Priming Capabilities
Not needed flooded suction
Power
12 amps max current draw
Max Pressure
Not needed
Inlet/Outlet Ports 
Inlet: 1.5″ (39 mm) Hose Barb
or thread fitting
Outlet: 1″ Hose Barb
Weight
4.9 lbs (2.24 kg)
MOTOR
Type
High quality seamless design
that is thermally protected
Leads
Wire leads
Temperature Limits
140°F (60°C) Max.
Duty Cycle
Intermittent
Voltage
12v/24v

 

SEAFLO MACERATOR PUMP MODELS:

Model GPM/LPM Dimensions Impeller Ports Lead Voltage Max Draw(A)
SFMP1-120-01 12/45.0 13.98″x5.24″x4.33″
355x133x110mm
Rubber & copper 1.5″Hose Barb
1″ Hose Barb
Yes 12V 12.0
SFMP2-120-01 12/45.0 13.98″x5.24″x4.33″
355x133x110mm
Rubber & copper 1.5″Hose Barb
1″ Hose Barb
Yes 24V 7.0

WASTE EVACUATION

The SEAFLO 01-Series DC macerator pump unit is the ideal solution for emptying marine holding tanks. Self priming to 5ft this pump will empty a typical 30 gallon (115 Liter) holding tank in less than 3 minutes. Duty cycle of the pump is 15 minutes continuous which means a 180 gallon (680 liter) can be emptied in a single operation.

It is recommended that holding tanks be flushed with several gallons of water after each pump out. This will reduce the possibility of a continued build up of sediment in the tank which could cause a potential blockage.

FISH BOX AND LIVEWELL TANK EVACUATION

The SEAFLO Macerator Pump is the ideal pump for the emptying of fish box and livewell receptacles. Very often the livewell tank will be above the waterline of the boat, when this is the case gravity can be used to empty the livewell tank. If not installed in this format then it is beneficial to use the SEAFLO macerator pump for evacuation due to its self-priming capabilities and also it’s grinding properties.

Fish boxes are typically mounted into the floor of the vessel and are very often below the waterline or only partially above the waterline. Again the SEAFLO Macerator pump has the characteristics that lend themselves to this application. The bait residue particles of ice, fish scales and anything else that could potentially be found in the Fish-Box will be easily passed buy the SEAFLO Macerator Pump, and the self priming capabilities are perfect for fish box installations common to many of today’s sports fishing boats.

Additional information

Weight 7 lbs
Dimensions 12 × 9 × 6 in
Voltage

12V DC, 24V DC

Macerator 01- General Information

Macerator 01- Instructions

 

 

Reviews

There are no reviews yet.

Be the first to review “Seaflo Macerator Pump 01-Series”

Your email address will not be published. Required fields are marked *